Upgrade Video Baby Monitor,WiFi Baby Camera,2.8″ Display and…

Price: $39.99
(as of Oct 01, 2024 13:34:11 UTC – Details)

Product Description

FAQs & Troubleshooting

My baby monitor is not working normally or is performing erratically.

1: Confirm proper installation power supply is securely plugged in. You should only use the Simyke power supply provided with your baby monitor. Make sure the electrical outlet is working and not controlled by a wall switch.

2: Make sure the parent unit and baby unit are turned on. Make sure that the blue light on the back of the camera is on.

3: The parent unit may be too far away from the baby unit. Or, other equipment or devices in your house may be affecting the connection between your parent unit and baby unit(s). Try placing the parent unit at least 3 feet away from WiFi devices, including laptops, smartphones, router, tablets and other WiFi streaming devices. Then, try to move your parent unit around (e.g. closer to baby unit or away from Wi-Fi devices) to find better reception. When placing the units closer together; note that they should not be closer than 3 feet apart.

4: Try resetting the parent and baby unit:

Step 1. Disconnect the power to the baby unit and parent unit.

Step 2. Wait approximately 15 secs.

Step 3. Reinstall adapter to the baby and parent unit.

Step 4. Wait one minute for the baby device and parent device to reconnect.

*Noise static and other erratic performance may be caused by nearby

electronic equipment and other cordless devices using the same frequency.

Separate your baby monitor from these devices as much as possible.

Unable to scan QR code to connect to network

First you need to check the following issues:

1) Whether the baby camera is properly plugged in and turned on

2) Whether the baby camera enters the network Pairing mode normally

3) Whether the app side can normally generate the correct QR code screenshot

4) Whether the camera prompts successful code scanning

5) Can not read the QR code prompted what

6）What is the specific tip of not being able to connect to the network

7) Whether the router is a 5G frequency band (currently only supports 2.4G WiFi)

All of the above may lead to the device can not be normal with the network.

If the baby camera can scan the code normally, but can not connect to the network prompts network connection timeout, you need to confirm whether the router is 5G or the phone’s QR code is correct.

If you confirm that you have entered the Pairing mode and keep reminding the code scanning timeout, try restarting the baby camera and re-enter the Pairing mode to scan the code.

The factory default setting of the baby monitor is to enter VOX mode.

When no sound is detected, the display will turn off to enter power saving mode, and when sound is detected, the display will light up to remind you. If you don’t like this default setting you can change it yourself.

Warm Tips

This baby monitors only supports 2.4 GHz Wi-Fi,Does not support 5G Wi-Fi.

If your home WiFi does not 2.4Ghz, please buy with caution.

Video baby monitor with app vewing, plug&play display viewing.

What’s in the Box

1 x Baby Camera

1 x Baby Monitor

1 Set Power Adapter

1 Set Power Adapter

1 x User Manual

You can see your baby on the plug&play display, Smartphone,tablet,you can add family members on the app to share baby’s happy moments.

2.8” video baby monitor with 2500mAh battery, The 2500mAh battery is good enough for your standby needs. On screen mode,Standby time is 10 hours, on VOX mode, Standby time is 6 hours.

Our video baby monitors use encrypted transmission of information to protect your family’s privacy,You don’t worry about compromising your privacy.

The infrared automatic night vision function allows you to monitor your baby’s every move without disturbing your baby’s sleep, your baby sleeps well and you feel at ease.

Viewing your baby via the app, the app alerts you when baby loud sounds are detedted, you can see and hear your baby via the app.

You can talk to your little one anytime anywhere you want, comfort your baby via 2-way talk when baby cry or unhappy.

ABS+PC
2 Ways to View: Simyke baby monitor with app and screen, you can see and hear your baby by 2.8” plug&play display when you are at home; You can also see your baby via the app when you’re on-the-go ( only 2.4GHz WiFi is supported )
Two-Way Audio & Lullabies: Baby monitors with camera and audio, Talk to your baby when baby needs you,There are 5 lullabies to choose from,You can play soothing music or white noise to put your baby to sleep.
Night Vision: This baby camera has infrared night vision,You can clearly see your baby’s every move without disturbing baby’s sleep via the smartphone or display.
VOX Mode: Sound-Activated screen, turn on VOX mode, the monitor will enter sleep mode when baby is sleeping or in a quiet state, the screen will automatically light up to remind you when your baby makes sounds or cries.
Up to 4 Cameras: 1 IPS display can be paired with 4 baby cameras, 1200ft connection range video baby monitor ensures the ability to connect to 4 different rooms.You can view each room to Keep Your Baby Safe.